NSN 6635014581290 (Tensiometer Dial In) | NSN Parts Lookup

If you're in need of NSN 6635014581290 parts such as 30444-0019, which have been manufactured by Weigh Tronix Inc we can provide assistance. At ASAP Aero Supplies, we are a renowned distributor with an inventory of over 2 billion obsolete parts from more than 5,000 manufacturers around the world, which are ready for shipment. Our specialty lies in being the reputable distributor of NSN 6635014581290, also known as Tensiometer Dial In parts.

We are dedicated to provide you with the premium quality NSN parts possible, including NSN 6635014581290. As the only independent distributor in the USA,  We pledge not source from China, you can be assured that we will go above and beyond to fulfill your needs.

Information for NSN 6635014581290, 6635-01-458-1290

  • Item Name: Tensiometer Dial In
  • FSG: 66 Instruments and Laboratory Equipment
  • CAGE Code: 17885
  • NIIN: 014581290
  • NCB Code: USA (01)
  • Manufacturers: weigh tronix inc

Part Number's List for NSN 6635014581290, 6635-01-458-1290

Part No Manufacturer Item Name QTY RFQ
30444-0019 weigh tronix inc tensiometer dial in Avl RFQ

6635-01-458-1290 Characteristics Data

MRCCriteriaCharacteristic
BHHYDEFLECTION ANGLE ADJUSTERNOT INCLUDED
AFJUCARRYING CASENOT PROVIDED
APSKSCALE RANGE0.0 TO 1000.0 POUNDS
AXGYMOUNTING METHODBRACKET
FEATSPECIAL FEATURESA PRECISION DIAL INDICATOR IS MOUNTED AT THE NULL POINT OF THE DEFLECTION BEAM; THE POINTER REVOLVES 360 DEGREES CLOCKWISE UNDER COMPRESSION OR TENSION FORCES; ACCIDENTAL OVERLOADS UP TO 30 PERCENT OF CAPACITY CAN BE SAFELY SUSTAINED WITHOUT INJURY TO THE DIAL INDICATOR OR DEFLECTION BEAM; ALL CAPACITIES FEATURE A 5:1 DESIGN SAFETY FACTOR; MAY BE MOUNTED HORIZONTALLY, VERTICALLY OR FLAT; THE BAKED ENAMEL FINISH RESISTS CORROSION AND RUST; ACCURACY OF +/- ONE PERCENT OF FULL CAPACITY; DIAL DIVISION 10 LBS INCREMENTS
APSJSCALE QUANTITY1
BHHWMATERIAL ACCOMMODATED DIAMETER0.500 INCHES NOMINAL
ASPXSCALE NAMECOMPRESSION
FTLDFUNCTIONAL DESCRIPTIONLOAD IS APPLIED AGAINST A HARDENED BALL WHICH ROTATES TO MAINTAIN VERTICAL ALIGNMENT AS PRESSURE INCREASES; THE BALL IS HELD IN PLACE WITH A SPRING CLIP; THE THREADED MOUNTING HOLE IS LOCATE OPPOSITE THE LOADING BALL IN THE BOTTOM OF THE BEAM
AMKDINDICATOR TYPEDIAL
BGTXTEMPERATURE COMPENSATORNOT INCLUDED
AGAVEND ITEM IDENTIFICATIONPACER DAWN

Relevant Components for NSN 6635-01-458-1290, 6635014581290

Send Instant RFQ

Guaranteed quotes back within 15 minutes, 24/7 x 365

Guaranteed On-Time Delivery
Over 75000 Manfacturers
Competitive Prices
Complete Purchasing Solutions

ASAP Semiconductor’s Certifications And Memberships

Thank You for Visit!

Don’t forget, ASAP Aero Supplies Can Respond to Your Request for Quote form Within Fifteen Minutes Or Less. All You Need to Do Is Fill Out and Send the Instant RFQ form On This Website’S Homepage.

Request for Quote

We use cookies to ensure that we give you the amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

Get A Quote