NSN 5306014603083 (Bolt Square Neck) | NSN Parts Lookup

If you're in need of NSN 5306014603083 parts such as ANSI B18.5, MS35751-209, which have been manufactured by Nat Aerospace Std, American National Standards we can provide assistance. At ASAP Aero Supplies, we are a renowned distributor with an inventory of over 2 billion obsolete parts from more than 5,000 manufacturers around the world, which are ready for shipment. Our specialty lies in being the reputable distributor of NSN 5306014603083, also known as Bolt Square Neck parts.

We are dedicated to provide you with the premium quality NSN parts possible, including NSN 5306014603083. As the only independent distributor in the USA,  We pledge not source from China, you can be assured that we will go above and beyond to fulfill your needs.

Information for NSN 5306014603083, 5306-01-460-3083

Part Number's List for NSN 5306014603083, 5306-01-460-3083

Part No Manufacturer Item Name QTY RFQ
ANSI B18.5 nat aerospace std bolt square neck Avl RFQ
ANSI B18.5 american national standards bolt square neck Avl RFQ
MS35751-209 nat aerospace std bolt square neck Avl RFQ
MS35751-209 american national standards bolt square neck Avl RFQ

5306-01-460-3083 Characteristics Data

MRCCriteriaCharacteristic
AAJFTHREAD DIRECTIONRIGHT-HAND
AASKHEAD STYLEBUTTON
AASUHEAD HEIGHT0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONASTM A307 GR A ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR SAE J429 GR 1 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THSDTHREAD SERIES DESIGNATORUNC
AHYMNOMINAL THREAD DIAMETER0.500 INCHES
CWXQNECK WIDTH0.492 INCHES MINIMUM AND 0.515 INCHES MAXIMUM
MATTMATERIALSTEEL OVERALL
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 2 CL 3 FED SPEC 1ST TREATMENT RESPONSE OR MIL-C-81562 TY 2 CL 3 MIL SPEC 1ST TREATMENT RESPONSE OR ASTM B633 TY 2 CL FE/ZN5 ASSN STD 2ND TREATMENT RESPONSE OR MIL-C-81562 TY 2 CL 3 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
CQBCMINIMUM TENSILE STRENGTH60000 POUNDS PER SQUARE INCH
AGQBNECK LENGTH0.250 INCHES MINIMUM AND 0.281 INCHES MAXIMUM
AAJDTHREAD CLASS2A
AASBFASTENER LENGTH4.150 INCHES MINIMUM AND 4.330 INCHES MAXIMUM
AASLHEAD DIAMETER1.032 INCHES MINIMUM AND 1.094 INCHES MAXIMUM
CMLPTHREAD QUANTITY PER INCH13
SFTTSURFACE TREATMENTCADMIUM OVERALL AND CHROMATE OVERALL OR ZINC OVERALL AND CHROMATE OVERALL
AASATHREAD LENGTH1.250 INCHES MINIMUM

Relevant Components for NSN 5306-01-460-3083, 5306014603083

Send Instant RFQ

Guaranteed quotes back within 15 minutes, 24/7 x 365

Guaranteed On-Time Delivery
Over 75000 Manfacturers
Competitive Prices
Complete Purchasing Solutions

ASAP Semiconductor’s Certifications And Memberships

Thank You for Visit!

Don’t forget, ASAP Aero Supplies Can Respond to Your Request for Quote form Within Fifteen Minutes Or Less. All You Need to Do Is Fill Out and Send the Instant RFQ form On This Website’S Homepage.

Request for Quote

We use cookies to ensure that we give you the amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

Get A Quote